Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Oklahoma City Homeowners
If you burn wood in Oklahoma City, the part of your chimney you can’t see is the part that matters most. Creosote builds up in layers that look harmless from the firebox, and a flue crack can send smoke or carbon monoxide into a house without any visible sign. An inspection is how you find those problems while they’re still cheap to fix.
Our technicians have up to 8 years of experience and inspect fireplaces and solid-fuel appliances across the metro. We open the firebox, run the flue, check the cap and flashing, and send a camera down the liner when the job calls for it. Every visit ends with a written account of what we found, in plain language, with photos you can look at yourself. No pressure and no guesswork: if work can wait, we say so. Same-day appointments are often available in Oklahoma City, and estimates are free.
Call (866) 334-8781. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Inspection
A Fireplace Inspection is a focused look at the firebox, damper, smoke chamber, and firebox-to-flue connection. It’s what you need if you’ve noticed smoke rolling into the room, a damper that sticks, cracked firebrick, or a fireplace you’ve never used and want to try safely. It’s also worth booking before a first burning season in a house you’ve just bought.
Linden Chimney Cleaning handles fireplace inspection, sweep, and repair ourselves, so a problem found during the inspection doesn’t turn into a referral to another contractor. We check the firebox joints, the damper operation, the smoke shelf, and the visible flue from below. Where the view from the firebox runs out, we go up top. A typical fireplace inspection in Oklahoma City runs $99-$250 depending on access and whether a camera is needed, and the written estimate sets the final price.
Firebox and Damper Checks
We look for open mortar joints, cracked firebrick, and rusted or warped dampers that won’t seal. A damper that doesn’t close lets conditioned air escape all summer and lets cold air down the flue in winter. Small firebox repairs caught early usually cost far less than rebuilding the box later.
Smoke Chamber and Smoke Test
The smoke chamber is the sloped space between the damper and the flue, and it’s where a lot of drafting problems start. We check for rough, parged surfaces that catch creosote and for gaps that let smoke bypass the flue. When a fireplace smokes, a smoke test shows us whether the problem is the chimney or the house’s air pressure.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole system: firebox, damper, flue, liner, crown, cap, flashing, and the exterior masonry. You need them when you buy a home, after a chimney fire, before switching fuels, or once a year if you burn regularly. Inspections are the part of chimney work that prevents surprises, and they’re the reason we don’t treat a sweep as the whole job.
Linden Chimney Cleaning offers three services and nothing else: sweep, inspection, and repair. That focus matters here, because every tool we bring is a chimney tool and every conversation is about your flue. We categorize inspections as Level 1, 2, or 3 depending on what’s required, and we tell you which one you need rather than defaulting to the most expensive. Typical chimney inspection services in Oklahoma City run $99-$350 depending on the level and access to the roof. The written estimate sets the final price.
What Gets Checked
Inside, we look at the firebox, damper, smoke chamber, and flue walls. Outside, we check the crown, cap, flashing, and masonry for cracks, spalling, and loose mortar. We also confirm the flue size suits the appliance it serves, since an oversized flue runs cold and drafts poorly.

When an Inspection Makes Sense
Before your first fire of the season is the obvious time, and so is right after buying a house with a fireplace nobody’s documented. If you’ve had a chimney fire, changed appliances, or added a liner, a fresh inspection confirms the system still works as a whole. Call us and we’ll tell you which level fits your situation.

Chimney Flue Inspection
A Chimney Flue Inspection looks specifically at the flue, the vertical passage that carries smoke and gases out of the house. It matters because the flue is where creosote accumulates, where liners crack, and where the majority of chimney problems originate. If you’ve had a fire, noticed a smell in warm weather, or your appliance has never drafted well, the flue is where we start.
We run a camera down the flue to see the liner’s full length, checking for cracks, gaps at joints, offset sections, and heavy glazed creosote that a brush won’t remove. The flue is also where we measure whether the liner suits the appliance; a flue that’s too large for the firebox cools the smoke and causes draft problems. A flue inspection in Oklahoma City typically runs $150-$350 depending on liner access and camera work, with the written estimate setting the final price.
Liner Condition
Clay tile liners crack from heat cycling, and stainless liners can develop seam failures or corrosion at the top. A cracked tile lets heat reach framing and lets carbon monoxide leave the flue. We document every defect with a photo so you can see the liner for yourself.
Creosote and Draft
Creosote builds in stages, from soft soot to hard glazed deposits that need mechanical removal. A restricted flue drafts poorly, which pushes smoke back into the room and accelerates creosote buildup. Measuring draft and inspecting buildup together tells us whether the flue needs cleaning, resurfacing, or relining.
Chimney Fire
A Chimney Fire is a fire inside the flue itself, usually fueled by creosote that has built up on the liner walls. Many are quiet, brief, and go unnoticed, which is exactly why they’re dangerous: the heat can crack the liner and damage the chimney’s structure without the homeowner realizing anything happened. Any suspected chimney fire means a professional inspection before the next burn.
We don’t fight fires; we assess what a fire left behind. That means checking the liner for heat damage, the masonry for cracked or spalled brick, the crown for damage, and the flue for glazed creosote that survived. If the liner is compromised, we can reline with DuraFlex flexible liner systems, and if the flue needs resurfacing, HeatShield lets us restore the ceramic surface without a full rebuild. Post-fire inspection in Oklahoma City typically runs $150-$400 depending on the damage and camera work needed. The written estimate sets the final price.
Signs a Fire Happened
Puffy, honeycombed creosote, discolored or warped caps, cracked tiles, and a strong burnt smell are common signs. Neighbors sometimes report a loud roaring or a plume from the chimney. If any of that sounds familiar, get it checked before you light another fire.
What Comes Next
After a fire, the liner is the first thing we look at, then the masonry around it. Damage that looks cosmetic at the surface often runs deeper. We photograph the full flue, explain what the fire did, and lay out repair options in order of priority so you can decide what to do first.
Level 2 Chimney Inspection
A Level 2 Chimney Inspection is the inspection most real-estate transactions, appliance changes, and post-fire checks require. It goes beyond what’s visible from the firebox and includes the attic, crawlspace, and roof, plus a video scan of the flue’s interior. If you’re buying a house in Oklahoma City with a fireplace, this is the level to ask for.
We check accessible portions of the chimney exterior and interior, verify clearances to combustible framing, examine the liner with a camera, and look at the cap, crown, and flashing. If you’ve changed appliances, added a wood stove insert, or relined the chimney, a Level 2 confirms the whole system still works together. A Level 2 inspection in Oklahoma City generally runs $200-$400 depending on roof access and how many flues the house has. The written estimate sets the final price.
Real Estate and Appliance Changes
Buying or selling a home is the most common reason people request a Level 2. A new wood stove, insert, or appliance swap is the other. In both cases, the inspection documents the system’s condition for whoever needs to see it.
What the Camera Adds
The video scan is what separates a Level 2 from a casual look. It shows the liner’s interior from top to bottom, including joints and offsets that can’t be seen from either end. That footage is the evidence behind any recommendation we make.
Chimney Leak
A Chimney Leak is water getting into the chimney system, usually at the flashing, crown, or cap, or through cracked masonry. It’s the kind of problem that shows up as a ceiling stain in spring or a damp smell in the firebox after rain. You need it diagnosed before the next wet season, because water and masonry don’t do well together.
We check the flashing where the chimney meets the roof, the crown for cracks, the cap for rust and gaps, and the masonry for spalled brick and failing mortar joints. Interior water damage and a leaking flue are common downstream effects of a problem that starts at the top. Repairs usually fall in the $250-$1,500 range depending on whether it’s a flashing reseal, crown repair, or masonry work, and the written estimate sets the final price. Call (866) 334-8781 and we’ll find where the water is actually getting in.
Tracing the Source
Water travels, so the stain on the ceiling rarely points to the actual entry point. We work from the top down, checking flashing, crown, and cap before assuming the masonry itself is the culprit. That order saves homeowners from paying for repairs that don’t solve the leak.
Repairs That Last
A leaking crown or flashing needs proper materials and a correct pitch, not a smear of sealant. Where masonry is spalled and porous, we can address it at the source. Copperfield and Gelco components hold up well in Oklahoma weather, and we use them when the job calls for it.
Chimney Camera Inspection
A Chimney Camera Inspection uses a video camera lowered through the flue to record the liner’s interior in real time. It’s needed whenever the liner’s condition is in question: after a fire, before a reline, when buying a home, or when an appliance isn’t drafting properly. It’s also how we answer the question every homeowner asks: do I really need this repair?
We run the camera from the top down, recording the full length of the flue and photographing any defect. If the liner is cracked or deteriorated, we can reline with DuraFlex flexible liner systems. If the clay flue is intact but pitted, HeatShield resurfacing can restore it without a rebuild. A camera inspection in Oklahoma City usually runs $150-$350 depending on access and the length of the flue, with the written estimate setting the final price.
What the Video Shows
You’ll see the liner as we see it: tile joints, glaze, cracks, gaps, and any debris blocking the flue. The footage gets saved so you have a record to compare against later. If you want to know what the last technician meant, we can show you.
Choosing the Repair
Some cracks call for a full reline; others only need resurfacing. The camera footage tells us which, and we explain the reasoning rather than simply naming a price. If work can safely wait a season, we say that too.
Brands We Service
We work with DuraFlex flexible liner systems regularly and know where they tend to wear, particularly at the top plate where heat and weather meet. We also use HeatShield ceramic resurfacing on clay flues that are pitted or cracked but still structurally sound, which lets us restore a flue without a rebuild.
From Gelco we source caps, covers, and components that fit properly and last through Oklahoma storms, and Copperfield has earned its place on the flashing and masonry side of our work. These are the kinds of professional-trade materials chimney technicians actually trust; whether you have DuraFlex or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling into the room. A fireplace that smokes is telling you the draft is failing, often because of a blocked flue or a liner problem. It’s worth checking before you use it again.
- A strong burnt smell in warm weather. That creosote smell in summer is usually a sign of heavy buildup or a past fire in the flue. Getting it inspected now means it’s handled before burning season.
- Water stains near the chimney or in the attic. Stains point to a leak, and leaks get worse with every rain. An inspection finds the entry point before the damage spreads into framing.
- Visible cracks in the masonry or crown. Cracked brick, spalling, or a crumbling crown lets water in and can point to structural movement. Those are things to look at before the next storm, not after.
- You’ve had a chimney fire or don’t know its history. Quiet chimney fires damage liners in ways you can’t see from the firebox. A camera inspection settles it.
Our Process, Step by Step
- 1
We talk it through first. You tell us what you’ve noticed: smoke, smell, stains, or a house you’ve just bought. That shapes what we check and which level of inspection makes sense.
- 2
We set up and protect the work area. Drop cloths go down before anything else, and we work so the room looks the way you left it. Nobody should have to vacuum after a chimney visit.
- 3
We inspect from the firebox up. Firebox, damper, smoke chamber, then the flue and the roof-level components. When the flue needs a closer look, we run the camera.
- 4
We show you what we found. Photos and video footage accompany the written account, so you can see the liner, the crown, and the flashing for yourself. We explain in plain language what’s a safety issue, what’s routine, and what can wait.
- 5
We give you the written estimate. Pricing is per job, set by the written estimate, and there’s no pressure to approve anything on the spot. If a sweep or repair is what makes sense, we schedule it.
How Much Does Chimney Inspection Cost in Oklahoma City?
Inspection pricing in Oklahoma City depends mostly on the level of inspection and how much roof work it requires. A typical Level 1 inspection runs $99-$200. A Level 2 inspection, which includes a camera scan of the flue and a look at the attic and crawlspace, runs $200-$400. A camera inspection focused on the flue alone runs $150-$350. Post-fire inspections, which take longer because we’re checking for heat damage throughout the system, usually fall around $150-$400.
Several things move the price within those ranges: how many flues the house has, whether the chimney is easy to reach from the roof, whether there’s an insert or appliance that limits access, and whether we find a problem that needs a closer look. A two-story house with a steep roof takes longer than a single-story ranch. A chimney with an insert in the firebox usually needs the appliance pulled to see the full flue.
You avoid overpaying by knowing what you’re buying. A Level 1 is a visual check of accessible parts. A Level 2 adds the camera and the concealed spaces. If someone quotes a Level 2 price for a Level 1 job, or tells you the liner is shot without showing you footage, ask questions. We always show the video and the photos.
Our estimates are free, and the written estimate sets the final price. Nothing is recommended without camera evidence you can see for yourself, and if the work can safely wait, we tell you so. Call (866) 334-8781 for an exact quote.
Our Service Area Near Oklahoma City
We inspect chimneys throughout Oklahoma City and the surrounding communities, including Oklahoma City proper, Nichols Hills, Spencer, Jones, McLoud, Goldsby, Del City, Warr Acres, The Village, and Bethany. Homes in the older neighborhoods tend to have older tile liners; newer builds often have inserts and different draft questions. We schedule inspections with fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll give you a realistic window when you book.
Serving Oklahoma City, OK – Our Local Coverage Area
We serve Oklahoma City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Oklahoma City
A chimney inspection is a professional assessment of your chimney system: firebox, damper, flue, liner, cap, crown, flashing, and masonry. It can be visual (Level 1), include the attic, crawlspace, and a camera scan of the flue (Level 2), or be a focused assessment after a fire or accident (Level 3). The point is to find problems before they become safety issues. Call (866) 334-8781 for a free estimate.
A Level 1 inspection typically takes 30 to 45 minutes, while a Level 2 with camera work and a look at the attic runs an hour or more. Post-fire inspections take longer depending on the amount of camera work required. We’ll give you a realistic time estimate when you book. Call (866) 334-8781 and we’ll schedule you.
Expect $99-$200 for a Level 1, $200-$400 for a Level 2, and $150-$350 for a camera inspection. Extras like multiple flues or difficult roof access can push the figure toward the top of those ranges. The written estimate sets the final price, and our estimates are free. Call (866) 334-8781 for an exact quote.
Yes, we work with DuraFlex flexible liner systems regularly and inspect them for seam failures, corrosion, and top-plate wear. We also use HeatShield resurfacing and Gelco components when a repair calls for them. Whether you have one of those or a different liner system, we can assess it and explain what we found. Call (866) 334-8781 to schedule.
Same-day inspections are often available in Oklahoma City. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 334-8781 and we’ll book you a slot.
Warranty terms depend on the specific service and material used, and we’ll spell them out in the written estimate before any work is approved. You’ll know exactly what’s covered and for how long. There’s no pressure to decide on the spot. Call (866) 334-8781 with any questions.
Clear the area around the fireplace and make sure we can get to the attic and roof access if a Level 2 is scheduled. If there’s an insert or appliance in the firebox, let us know when you book so we can plan around it. Leave the fire out for at least a day before the visit. Call (866) 334-8781 to confirm what’s needed.
Schedule Your Chimney Inspection Service in Oklahoma City Today
Burning season arrives whether your chimney is ready or not. An inspection gives you the facts about your flue, your liner, and your masonry, in writing, before the first fire. Call (866) 334-8781 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Linden Chimney Cleaning.